Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Redondo Beach?
In Redondo Beach, a chimney cap replacement typically runs $175 to $450, a crown repair runs $300 to $650, and a full crown rebuild runs $700 to $1,500. The gap between those numbers is almost entirely about access and condition: a single-flue cap on a low ranch home near Alta Vista is a quick job, while a rebuilt crown on a two-story house off Catalina Avenue carries scaffolding and more material. We give exact pricing after we’ve seen the flue from the roofline, and estimates are free.
Key takeaways:
- Standard single-flue chimney cap: $175 to $450 installed
- Crown repair (cracks, hairline fissures, sealing): $300 to $650
- Full crown rebuild with new mortar mix: $700 to $1,500
- Cap-and-crown done together usually saves $75 to $150 versus booking them separately
- Call (866) 632-1088 for a free rooftop assessment before you commit to anything
If you’ve already noticed a missing cap, rust streaks down the flue, or a crown that’s started to crumble, our Chimney Cap & Crown in Redondo Beach service page walks through the full install and repair process.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s how the numbers break down for a typical Redondo Beach home. These ranges cover labor and materials for standard residential chimneys. Two-story homes, tile flues, and unusually wide multi-flue crowns land near the top of each range or slightly above.
| Line item | Typical cost in Redondo Beach |
|---|---|
| Single-flue stainless cap (Gelco, Copperfield) | $175 – $350 |
| Multi-flue or custom-sized cap | $300 – $550 |
| Decorative / copper cap | $450 – $900 |
| Animal guard (screen or mesh addition) | $60 – $150 |
| Crown repair – crack sealing, small patches | $300 – $650 |
| Full crown rebuild | $700 – $1,500 |
| Crown rebuild on two-story or difficult roof | $1,100 – $1,900 |
| Crown coat / sealant application (preventive) | $250 – $500 |
| Flashing repair at the roofline | $200 – $500 |
What pushes a job toward the top of the range: the roof pitch (steep roofs need extra setup and safety gear), whether the flue has more than one termination, whether the crown has separated from the flue tile, and whether lead flashing needs replacement rather than re-sealing. What pulls it toward the bottom: a simple cap swap on a low-slope roof you can see from the driveway, or a crown with one fresh crack that hasn’t spread into the tile.
We install caps from Gelco and Copperfield, brands chosen for the same reason we spec chimney repair stock from DuraFlex and Olympia Chimney: they hold up to coastal salt air and don’t rust through in three winters. A $99 hardware-store cap will do the opposite. If a contractor quotes you a cap at that price, ask what it’s made of.
What Affects Chimney Cap & Crown Pricing in Redondo Beach
Redondo Beach chimneys live in a specific environment, and that shapes what we find on roofs here. Six factors move the number most:
- Salt air and marine humidity. Homes from the pier up through South Redondo sit in a salt-heavy air mass that eats bare steel fast. A galvanized cap will pit and rust within 2 to 4 years here; stainless or copper caps cost more up front but last decades. This is why we don’t stock cheap caps.
- Roof pitch and access. A bungalow near Franklin Park with a walkable roof is a straightforward job. A steep-pitch roof on a hillside street north of Torrance Boulevard needs staging and a second technician, which adds labor.
- Number of flues. Most older Redondo Beach homes have one flue. Add a second or third (fireplace plus furnace plus water heater) and the cap gets wider and pricier: typically $150 to $250 more per additional termination.
- Crown condition. A crown with one hairline crack can be repaired. A crown that’s crumbling, pulling away from the flue tile, or was poured thin by a previous contractor usually needs a full rebuild. We check for separation at the flue joint before quoting repair, because sealing a failing crown just delays the problem.
- Flue type. Clay tile flues are the norm in this area. Metal liners, which we install in DuraFlex when the original flue is compromised, change how the crown is formed at the top.
- Time of year. Spring and early summer are the slowest season for chimney work in Redondo Beach, and scheduling a cap or crown in May often beats an October appointment. We have looser availability off-season.
One local pattern worth mentioning: homes built in the 1950s and 1960s around the Beryl Heights and North Redondo neighborhoods often have original crowns that have never been touched. Sixty-plus years of marine air and thermal cycling typically leaves them cracked. We see these on a large share of first-time inspections, and the crown is often the only thing standing between a working flue and water damage in the firebox below.
How to Save on Chimney Cap & Crown
The best savings on cap and crown work come from timing and bundling, not from negotiating down the material quality.
- Bundle the cap with the crown. If you already need crown work, adding a cap in the same visit usually saves $75 to $150 versus booking separately. One trip to the roof, one setup.
- Catch the crown early. A $250 to $500 crown coat applied while the surface is still sound can postpone a $1,000 rebuild by several years. Waterproofing a crown before it cracks is the single cheapest thing you can do for a chimney in Redondo Beach.
- Fix flashing while you’re up there. If the flashing at the roofline is failing, have it addressed during the same visit. A second trip costs labor.
- Skip decorative caps unless you want one. A copper or decorative cap costs $450 to $900. It’s beautiful, but the job of a cap is to keep rain, animals, and sparks out, and a quality stainless cap does that for less.
- Ask for a written breakdown. Any contractor worth hiring will show you the line items: cap, crown, flashing, labor. You shouldn’t have to guess.
Our estimates are free, and we’ll tell you plainly if the crown can be repaired rather than rebuilt. Call (866) 632-1088 to schedule. We also handle dryer vent cleaning on the same visit if you want to knock out two fire-safety items in one appointment.
Chimney Cap & Crown Pricing: What’s Actually Included
When a quote looks low, it usually omits something. Here’s what a proper cap and crown job should cover, and what you should ask a contractor to confirm in writing before work starts.
- Roofline inspection. Before quoting, we look at the crown surface, the flue tile, the flashing, and the cap’s mounting point. A quote without a rooftop look is a guess.
- Cap sizing to the flue. A cap that’s too small or too loose fits badly and lets water in at the edges. Proper sizing means measuring the flue tile, not estimating from the ground.
- Fastening. Caps should be secured so a Santa Ana wind can’t lift them. Screwed into the flue tile or strapped to the crown, depending on the setup.
- Crown mix and cure. A rebuilt crown is formed with a mortar mix designed for chimney crowns, sloped away from the flue so water runs off, and cured properly. A rushed crown that dries too fast will crack.
- Cleanup. Mortar and debris off the roof, and the ground area cleared of any dropped material.
- Photo documentation. We photograph the before and after so you can see what was done, especially on a roof you can’t easily inspect yourself.
For a broader view of how a full chimney assessment fits together, start from our home page and read through the repair and cleaning services. If you’ve been told your liner needs replacing as well, ask about HeatShield restoration: it’s a specialized repair method that can restore a compromised flue without a full rebuild, which is a meaningfully different price than tearing out the chimney. We use HeatShield specifically because it lets us save a flue that a sweep-only company would only tell you to replace.
Neighboring cities have their own quirks, and we serve them the same way: if you’re a bit south, our cap and crown service in Hermosa Beach page covers what’s different about roofs there, and we handle cap and crown work in Manhattan Beach and cap and crown service in Torrance with the same materials and method.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Redondo Beach?
A standard single-flue stainless cap costs $175 to $350 installed in Redondo Beach, and a multi-flue or custom-size cap runs $300 to $550. Decorative copper caps go higher, $450 to $900. Call (866) 632-1088 for an exact quote on your flue, and the estimate is free.
How much does chimney crown repair cost?
Crown repair in Redondo Beach typically runs $300 to $650 for crack sealing and small patches, while a full crown rebuild costs $700 to $1,500. A two-story home or a difficult roof access can push the rebuild toward $1,900. The deciding factor is whether the crown has separated from the flue tile, which we check before quoting.
Is it cheaper to repair or replace a chimney crown?
Repair is cheaper when the crown has hairline cracks but is still bonded to the flue: $300 to $650 versus $700 to $1,500 for a rebuild. Once the crown is crumbling, pulling away from the tile, or has been previously patched and failed, repair becomes a temporary fix and a rebuild is the better value. We’ll tell you which situation you’re in after inspecting the top.
Can you install a chimney cap and crown the same day?
Often, yes. A standard cap install and a crown repair can be completed in one visit for most single-story homes in Redondo Beach. Full crown rebuilds may need a return visit after the mortar cures. Call (866) 632-1088 to check scheduling and get a free estimate.
Why does chimney cap and crown work cost more in Redondo Beach than inland cities?
Salt air is the main reason. Coastal humidity and salt accelerate rust on cheap caps and speed up mortar wear on crowns, so we specify stainless and copper-rated materials that cost more than the hardware-store versions but hold up here. Roof access on older, steeper homes adds labor as well. The long-term math favors the better material: a cap that lasts 20 years beats one replaced every 4.
Pricing reflects the Redondo Beach market as of 2026. Chimney Sweep Redondo Beach offers free estimates – call (866) 632-1088.
Written by the team at Chimney Sweep Redondo Beach, serving Redondo Beach since our first flue inspection on the hill streets above the pier.
What Our Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Emily Delaney"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Adel Mansour"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Yolanda Prince