Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Wilmington, CA
Chimney repair in Wilmington usually comes down to two things: moisture damage from the marine layer and original 1940s-50s masonry showing its age. Most of the fireplaces we service here were built fast for refinery and port workers, and decades of damp, salty air have worked their way into mortar joints, crowns, and clay flue tiles. We’re the single contractor for the sweep, the repair, and the dryer vent – no handoffs. Call us at (866) 632-1088 when you want an honest assessment backed by camera evidence.
Why Wilmington Homes Are Different
Wilmington’s housing stock is dominated by compact single-story stucco bungalows and small tract homes from the 1940s and 50s. These homes were built quickly, and the fireplaces often have undersized clay flues and thin mortar crowns. Add Wilmington’s coastal marine layer, and you get a specific failure pattern: damp, salty air settles into porous brick and mortar, rust forms on metal fireboxes and dampers, and the chimney slowly crumbles from the top down. It’s rarely about heavy creosote here. Residents don’t burn much wood, so flues stay surprisingly clean. The real issues are rust, spalling brick, pest nests from birds and squirrels, and rainwater getting in through cracked crowns and failed flashing. Homes near the refineries and port may have soot-stained exteriors from air pollution, but inside the flue, the story is moisture. That changes what we look for during an inspection: we’re checking for water intrusion and structural deterioration, not just sweeping out soot.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Wilmington Services
Wilmington homeowners most often call us for two jobs: the annual chimney sweep that keeps the fireplace safe for the light, occasional burning this area actually sees, and dryer vent cleaning that clears lint from tight laundry closets in older tract homes.
Chimney Sweep in Wilmington
A sweep in Wilmington is less about heavy creosote and more about removing pest nests, checking for rust and moisture damage, and confirming the flue is still sound after years of coastal air. Because most fireplaces here see light use, the sweep itself is usually straightforward, but the inspection part matters more. We’re looking for failing mortar, rusted dampers, and gaps where moisture is getting in. Chimney Sweep in Wilmington covers what we do, what it costs, and why the marine layer here makes annual checks worth it.
Dryer Vent Cleaning in Wilmington
In Wilmington’s small 1940s-50s homes, laundry areas are often in tight utility closets or attached garages with short but lint-clogged exhaust runs. Lint buildup in a dryer vent is a house-fire risk that builds quietly, especially where vent runs are short and horizontal. We’re not doing a brush-through; we’re checking the full run from dryer to exterior cap. Dryer Vent Cleaning in Wilmington explains the signs, the process, and what we use from Famco to put the vent system right.
Chimney Repair in Wilmington
Most chimney repairs we do in Wilmington trace back to the same root cause: water. The marine layer leaves a fine film of moisture on masonry, and over decades it works into the mortar, freezes and expands on the rare cold night, and spalls the brick face. Original 1940s and 50s chimneys were often built with thin mortar joints and no proper cap or flashing coverage, and that combination now shows up as cracked crowns, loose bricks, and water stains on the ceiling near the hearth. Chimney Repair is our core service, and we approach every Wilmington job by looking at the whole structure, not just the obvious crack.
Chimney Cap Installation
Signs you need it
You can hear birds or squirrels inside the flue, or you’ve found nesting material falling into the firebox from above.
What it costs in Wilmington
A stainless steel cap installed in Wilmington typically runs $250 – $450 depending on flue size and roof access.
How we do it
We measure the flue opening, select a Gelco or Olympia Chimney cap sized for your tile, secure it with masonry fasteners, and seal the base against moisture.
Chimney Cap Replacement
Signs you need it
The existing cap is rusted through, lifted at one corner, or missing entirely after a winter storm.
What it costs in Wilmington
Cap replacement in Wilmington generally runs $275 – $475, including removal of the old cap and disposal.
How we do it
We remove the old cap, inspect the flue rim for damage, clean the mounting surface, and install a new professional-grade cap from Gelco or Olympia Chimney with a proper seal.
Chimney Liner Installation
Signs you need it
Your clay tiles are cracked or missing, a camera inspection shows gaps between tiles, or you smell smoke indoors when the fireplace is in use.
What it costs in Wilmington
A stainless liner installed in a typical Wilmington single-story chimney runs $2,500 – $4,500 for materials and labor.
How we do it
We run a camera first to document the damage, then size and install a DuraFlex stainless liner, insulate where needed, and connect it to the appliance and a new top plate.
Chimney Flashing Repair
Signs you need it
You see water staining on the ceiling near the chimney, or the roof flashing is pulled away from the brick with visible gaps.
What it costs in Wilmington
Flashing repair in Wilmington typically runs $350 – $700 depending on roof pitch and how much of the existing flashing must be removed.
How we do it
We cut back old flashing, install new step and counter flashing using Copperfield components, and seal everything with a polyurethane sealant that withstands coastal moisture.
Chimney Crown Repair
Signs you need it
The concrete crown on top of the chimney is cracked, pitted, or has chunks missing, letting water into the masonry below.
What it costs in Wilmington
Crown repair usually runs $450 – $900 in Wilmington, depending on crown size and whether we’re patching or rebuilding.
How we do it
We grind away loose material, build or re-form the crown with a proper wash and overhang, and apply a waterproof membrane that handles Wilmington’s damp air.
What Chimney Repair Costs in Wilmington
| Item | Typical range in Wilmington |
|---|---|
| Chimney cap installation | $250 – $450 |
| Chimney cap replacement | $275 – $475 |
| Chimney liner installation | $2,500 – $4,500 |
| Chimney flashing repair | $350 – $700 |
| Chimney crown repair | $450 – $900 |
Can you fix a cracked chimney crown without rebuilding the whole chimney?
Yes, in most Wilmington homes the crown can be ground back and re-formed without touching the rest of the chimney. The flue and masonry below usually just need a waterproof membrane application. Call (866) 632-1088 for a camera inspection and exact quote.
Does a rusted metal firebox mean the chimney needs a full rebuild?
Usually not. Rusted fireboxes and dampers are common in Wilmington due to marine moisture, but the fix is often a new damper and firebox panel treatment, not new masonry. We’ll show you the camera footage and tell you plainly what needs work. Call (866) 632-1088 to schedule.
Brands We Service in Wilmington
We work with Gelco and Olympia Chimney caps, Copperfield flashing components, and DuraFlex liners. These are professional-grade materials we chose because they stand up to Wilmington’s salt air and damp winters. Our brands page goes into what we use and why.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Wilmington, CA
| Service | Typical range in Wilmington |
|---|---|
| Chimney sweep | $170 – $280 |
| Dryer vent cleaning | $120 – $225 |
| Chimney cap installation | $250 – $450 |
| Chimney cap replacement | $275 – $475 |
| Chimney liner installation | $2,500 – $4,500 |
| Chimney flashing repair | $350 – $700 |
| Chimney crown repair | $450 – $900 |
Two things push prices up in Wilmington more than anything else. First is roof access: these single-story bungalows sit tight on small lots, which often means ladder work over fences or from a neighbor’s property line, and that takes more time. Second is the condition of original 1940s-50s mortar, which can crumble faster during repairs and require more prep. Every job we book comes with an upfront price agreed before we start, based on what the camera inspection shows, no surprise add-ons afterward.
Neighborhoods We Serve in Wilmington
We cover all of Wilmington, from the blocks along Avalon Boulevard down to the neighborhoods bordering the Port of Los Angeles and up toward West Carson. Most of our Wilmington calls come from the older tract areas between Pacific Coast Highway and Lomita Boulevard where the original 1940s-50s fireplaces are concentrated.
- Wilmington proper (90744)
- Wilmington Harbor area
- Blocks along Avalon Boulevard
- Near the Port of Los Angeles boundary
- Wilmington’s 90748 north end
For most Wilmington appointments, we can typically get a crew scheduled within the same week, not the same day.
Service Area – Cities Near Wilmington
Our trucks run the full South Bay and harbor corridor. If you’re just over the city line, we serve Harbor City, CA, Harbor Gateway South, CA, and West Carson, CA. We also work up the coast in Manhattan Beach, CA. Same team, same upfront pricing, same camera-backed honesty.
Serving Wilmington, CA – Our Local Coverage Area
We’re based in the Wilmington area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Wilmington
Most Wilmington appointments are scheduled within five to seven business days. We don’t run same-day emergency call-outs, but we do keep Tuesday and Thursday routes through the harbor corridor. Call (866) 632-1088 and we’ll find the first opening that works for you.
Most chimney sweeps, cap replacements, and crown repairs don’t trigger a permit in Wilmington. Liner installations usually don’t either, though a full teardown and rebuild would. We’ll tell you during the quote if your job is one of the rare ones that needs paperwork.
You get the same crew that works out of Redondo Beach, not a sub. We’ve served Wilmington since 2017 and hold our own appointments here. The technician who quotes your sweep or repair is the same one doing the work. Call (866) 632-1088 to book.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Wilmington Customers Say
"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Maya Gupta"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Jodi Walsh"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Rafael Salazar